Supa Synergy™
![]()
Integrated micronised mineral blend to promote structural strength, optimise base saturation, and brix lift.
Supa Synergy™ is an integrated micronised mineral suspension designed to strengthen plant structure, optimise base saturation and lift brix across a wide range of crops. It delivers highly available calcium, silicon, phosphorus, sulfur, boron and magnesium to support cell wall integrity, resilience and efficient nutrient uptake and translocation. Supa Synergy™ can be applied via soil, fertigation, liquid injection or foliar spray, making it a flexible tool for both soil regeneration and in-crop nutrition. Regular use supports improved soil health, stronger plants and more productive, resilient farming systems.
Growth Stage
- Planting
- Vegetative Growth
- Pre-flower, Flowering, fruit set and fill
Key Performance
- Builds cell strength and associated crop resilience
- Improves nutrient uptake and translocation
- Improve soil health and base saturation
TYPICAL ANALYSIS W/V:
| Calcium (Ca) | 12.3% |
| Silicon (Si) | 12.3% |
| Phosphorus (P) | 2.58% |
| Sulfur (S) | 4.1% |
| Boron (B) | 0.43% |
| Magnesium (Mg) | 0.56% |
| pH | 5.5 – 7.5 |
| SG | 1.4 |
| Appearance | Thick grey liquid |
Crop |
Foliar Spray Rate |
Frequency |
| Vegetables | 1 L per 100 L water up to 5 L/ha equivalent | Apply weekly or as required |
| Orchards & Vineyards | 1 L per 100 L water up to 10 L/ha equivalent | Apply every 2 – 4 weeks or as required. |
| Ornamentals & Turf | 1 L per 100 L water up to 7 L/ha equivalent | Apply every 2 – 4 weeks or as required |
| Broadacre Crops | 2 – 3 L/ha in 60 – 100 L water, depending on canopy closure |
Apply as required |
| Pasture | 2 – 3 L/ha in 60 – 100 L water | Apply as required |
| Spot-Spraying | 50 mL per 10 L water | Apply as required |
Soil Ameliorant or Fertigation
SOIL APPLICATION
5– 30 L/ha as required.
Use higher rate for soil amelioration.
Apply monthly or as required.
Liquid Inject
3 – 10 L/ha. Use a minimum dilution rate of 1 part product to 3 parts water. Rate will depend on crop, row spacing and soil type. Always consider N&P crop requirements for starters based on reliable soil test data.
Home and Garden
Dilute 50 mL per 9 L watering can and apply the diluted mix at a rate of 1 litre per square metre. Repeat every 2 - 4 weeks as required.
Shake or stir well before use and maintain constant agitation. It is advisable to pre-mix, adding this product slowly while maintaining agitation in spray tank to prevent settling of solids. Will pass through 200 micron filter under ideal conditions, however, a coarse inline filter (500 microns/35 mesh) is recommended to ensure the delivery lines are free from particle contaminants from other sources. Where higher water rates are required for good foliar coverage, do not exceed maximum product rate per hectare. MMS products will leave a visible residue on leaves and fruit when used as a foliar. Avoid spraying close to harvest if produce is susceptible to staining. Sensitive foliage or plants should be test sprayed prior to full scale application. Frequencies are a guideline only and can be adjusted according to farm practices and/or in conjunction with crop monitoring. Ensure suitable spray conditions (e.g. temperature, humidity, wind-speed), prior to foliar application. Compatibility and/or performance cannot be guaranteed when combined with other products. Jar test for compatibility and spray test on small area before wide-spread use.
Store in a cool dry area out of direct sunlight. This product has been tested to store safely down to 5°C. Sedimentation may occur below 5°C. Do not pre-mix or store in diluted form. MMS products are very heavy and every care should be taken when handling these materials to avoid back injury.
Do not exceed maximum product rate per hectare. MMS products will leave a visible residue on leaves and fruit when used as a foliar. Avoid spraying close to harvest if produce is susceptible to staining. Sensitive foliage or plants should be test sprayed prior to full scale application.
Online orders are only available within Australia. For international orders, please contact us.
Click here for detailed shipping information.
Any recommendations provided by Nutri-Tech Solutions Pty Ltd (NTS)
or its Distributors are advice only. As no control can be exercised over storage, handling, mixing, application or use, or weather, plant or soil conditions before, during or after application (all of which may affect the performance of our program), no responsibility for, or liability for any failure in performance, losses, damages, or injuries (consequential or otherwise), arising from such storage, mixing, application, or use will be accepted under any circumstances whatsoever. NTS recommend you contact an Agronomist prior to product application. The Buyer assumes all responsibility for the use of any NTS products.
You may also like
More from Micronised Mineral Suspensions (MMS)
Recently viewed