PACK INCLUDES:
OPERATING GUIDE Follow the steps for moistening and calibrating the meter in the meter instruction manual. NTS stock replacement standard solution in 120 mL volumes for ongoing calibration requirements. Recalibrate before each use (once only if performing several measurements)
SAP TESTING PROCEDURE Apply a few drops of freshly extracted sap solution to the electrode chamber ensuring that both electrodes are covered with solution. Wait for a stable reading
SOIL TESTING PROCEDURE Wearing gloves to avoid contamination take samples from 15 – 20 sites within the test area. Sample to a depth of 15 cm. Remove any plant matter from the top of the sample. Combine samples in a clean container and mix thoroughly. Take a small subsample of the mixed soil and mix one part soil with five parts deionised water. Shake thoroughly for 5 seconds. Allow the contents to sit for 30 minutes. Swirl the solution then transfer a few drops to the electrode chamber using a pipette. The same soil solution can be used for testing pH. The ideal soil conductivity when prepared as a 1:5 solution is 0.1 – 1.0 mS/cm. However, ideal EC values are dependent on soil clay content and crop specific salt tolerance
Store in a cool, dry place out of direct sunlight.
Please contact us for more information.
If the meter has not been used for an extended period of time it may be necessary to repeat moistening of the electrode. When not in use keep the unit free from dust inside the storage case with the plastic cap in place. Warning : The electrode chamber has a thin glass backing – take care while using and cleaning to avoid damage
Online orders are only available within Australia. For international orders, please contact us.
Click here for detailed shipping information.
Any recommendations provided by Nutri-Tech Solutions Pty Ltd (NTS)
or its Distributors are advice only. As no control can be exercised over storage, handling, mixing, application or use, or weather, plant or soil conditions before, during or after application (all of which may affect the performance of our program), no responsibility for, or liability for any failure in performance, losses, damages, or injuries (consequential or otherwise), arising from such storage, mixing, application, or use will be accepted under any circumstances whatsoever. NTS recommend you contact an Agronomist prior to product application. The Buyer assumes all responsibility for the use of any NTS products.
