Nutri-Key Moly Shuttle™
Sometimes micronutrients are required in such small amounts, it is almost impossible to conceive the magnitude of their effect. Molybdenum is one of them.
Molybdenum is part of the enzyme that allows atmospheric nitrogen to be utilised in the soil. It is rarely measured in a soil test, but without 0.4 ppm in the soil there can be serious problems. Nutri-Key Moly Shuttle™ allows foliar security – i.e., a foliar spray will cover a plant deficiency for a season if there is an unrecognised soil shortage of molybdenum.
Key Performance
- 4.7% Mo plus background nutrition
- Superior Shuttle ® chelation for enhanced uptake
- Enhance protein synthesis
Growth Stage
- Vegetative Growth
- Pre-flower, Flowering, Fruit Set and Fill.
Typical Analysis W/V
| Molybdenum (Ma) | 4.76% |
| Total Nitrogen (N) (as organic) | 0.18% |
| Carbon (C) (as Shuttle chelator) | 1.60% |
| SG | 1.1 |
| pH | 8.5 - 9.5 |
| Conductivity | 50 - 70 mS/cm |
| Appearance | Brown liquid |
Application Rates
| Crop | Foliar Spray Rate | Frequency |
|---|---|---|
| Vegetables | 0.5 L per 100 L water up to 1 L/ha equivalent | As required |
| Orchards & Vineyards | 0.5 L per 100 L water up to 2 L/ha equivalent | As required |
| Ornamentals | 0.5 L per 100 L water up to 1 L/ha equivalent | As required |
| Turf | 0.5 L per 100 L water up to 1 L/ha equivalent | As required |
| Spot Spraying | 25 mL per 10 L water | As required |
Home Garden Application: Dilute 2 mL per 9 L watering can and apply the diluted mix at a rate of 1 litre per square metre. Do not apply more than 6 times per year without demonstrated trace element requirement.
Stir well before use. Rates and frequencies should be adjusted according to crop monitoring. Where higher water rates are required for good foliar coverage, do not exceed maximum product rate per hectare. Sensitive foliage or plants should be test sprayed prior to full scale application. Ensure suitable spray conditions (e.g. temperature, humidity, wind-speed), prior to foliar application. Compatibility and/or performance cannot be guaranteed when combined with other products. Jar test for compatibility and spray test on small area before wide-spread use
Store in a cool dry area out of direct sunlight. This product has been tested to store safely down to 5°C. Crystallisation or sedimentation may occur below 5°C. Do not pre-mix or store in diluted form. Seal lid/cap immediately after use
Avoid spraying close to harvest if produce is susceptible to staining. Note: Product in 1000 L tanks may weigh over 1 tonne. Forklift with 2 tonne lifting capacity is recommended
Online orders are only available within Australia. For international orders, please contact us.
Click here for detailed shipping information.
Any recommendations provided by Nutri-Tech Solutions Pty Ltd (NTS)
or its Distributors are advice only. As no control can be exercised over storage, handling, mixing, application or use, or weather, plant or soil conditions before, during or after application (all of which may affect the performance of our program), no responsibility for, or liability for any failure in performance, losses, damages, or injuries (consequential or otherwise), arising from such storage, mixing, application, or use will be accepted under any circumstances whatsoever. NTS recommend you contact an Agronomist prior to product application. The Buyer assumes all responsibility for the use of any NTS products.
You may also like
More from Shuttle® Chelation Liquid Fertilisers
Recently viewed