A high performance, cost-effective, user-friendly 200 L microbe brewer for both aerobic and anaerobic multiplication. NTS have researched and designed the ultimate microbe brew equipment for smaller scale brews. The Brewstar 200™ Complete Dual Purpose Brewing Station generates ideal dissolved oxygen for optimum proliferation of beneficial microbiology, and is perfect for growers requiring brews between 100 - 200 L.
Pump Specifications:
Power: 100 W
Flow Rate: 140 L/min
When to Recommend: For small scale agricultural systems when 100 - 200 L of microbe brew is required in a single application. Whenever soil-life needs boosting (in a majority of soils).
INSTALLATION:1. Position air pump beside tank, 30 cm above water line.2. Remove packing tape from barrel union O-rings and discard (tape for transportation only).3. Connect the air diffuser to the drum via the two barrel unions (hand tight).4. Attach supplied clear hose with supplied hose clamps to the tank inlet and the air pump outlet.BREWING:When using potentially contaminated water sources (e.g. dam water) treat water first using bleach (4% available chlorine) at a rate of 50 mL per 100 L of water. Proportional amounts of bleach will be required if the available chlorine % varies. Aerate for at least one (1) hour, until the smell of chlorine dissipates.Aerobic Brew: With the pump turned on, add microbe food, Dominate-B™/Dominate-F™ (if required) and then microbial inoculum – refer to inoculums for specific brewing instructions, including required temperature and brew duration. Drum lid is not required during aerobic brewing.Anaerobic Brew:The Brewstar 200™ is supplied with an air-tight lid and is also suitable for anaerobic brewing.
BREWER CLEANING:a) At the end of the brewing process: Rinse all surfaces including the inside of the diffuser pipes (easily removed by undoing the two PVC barrel unions). Be careful not to dislodge the barrel union O-rings when cleaning. Apply Path-X™ as a spray at a dilution of 1:100 (10 mL to 1 L of water) to all brewing surfaces and allow at least 10 minutes before rinsing thoroughly and allowing to dry in storage.b) If doing more than one brew consecutively: Rinse all surfaces with water and wipe down brewing surfaces between brews.
Please contact us for more information.
A thermostatically controlled water heater (300 W aquarium heater) is recommended if your starting water temperature is < 20°C. This heater is available from NTS (Product Code: HT-300W). As no control can be exercised over grower-selected microbe inoculums/food, and/or brewing conditions, Nutri-Tech Solutions Pty Ltd accept no responsibility or liability for any losses, damages, or injuries arising as a result of undesirable brew outcomes.
Online orders are only available within Australia. For international orders, please contact us.
Click here for detailed shipping information.
Any recommendations provided by Nutri-Tech Solutions Pty Ltd (NTS)
or its Distributors are advice only. As no control can be exercised over storage, handling, mixing, application or use, or weather, plant or soil conditions before, during or after application (all of which may affect the performance of our program), no responsibility for, or liability for any failure in performance, losses, damages, or injuries (consequential or otherwise), arising from such storage, mixing, application, or use will be accepted under any circumstances whatsoever. NTS recommend you contact an Agronomist prior to product application. The Buyer assumes all responsibility for the use of any NTS products.
