An 8% fulvic acid liquid possessing a myriad of yield-enhancing qualities.
Fulvic Acid is a powerful organic extract from humates which offers a host of benefits for both the soil and the plant.
Benefits
- Australian Certified Organic (ACO) Registered Farm Input 456AI.
- Convenient liquid formulation.
- Natural chelating agent.
- Increases nutrient uptake.
- Promotes beneficial soil microbes.
- Improves availability of rock minerals.
- Increases crop yield and quality.
- Compatible with a wide range of other inputs.
Typical Analysis W/V
Fulvic Acid | 8% |
SG | 1.06 |
pH | 3.5 - 4.5 |
Conductivity | 20 - 40 mS/cm |
Appearance | Brown liquid |
Application Rates
Foliar Spray Rates
Type |
Application Rate | Frequency |
---|---|---|
Horticulture/Turf | 0.5 L per 100 L water up to 3 L/ha equivalent | Apply weekly or as required - Include with all nutrient foliar sprays (confirm compatibility) |
Broadacre Crops | 1 L/ha in 60 – 100 L water, depending on canopy closure | Include with all nutrient foliar sprays (confirm compatibility) |
Pasture | 1 – 2 L/ha in 60 – 100 L water | Include with all nutrient foliar sprays (confirm compatibility) |
Spot-Spraying | 50 mL per 10 L water | Apply as required |
Fertigation
Application Method | Application Rate | Frequency |
---|---|---|
Horticulture/Turf | 3 – 5 L/ha | Apply weekly or as required - Include with all nutrient applications (confirm compatibility) |
Home Garden: Dilute 15 mL per 9 L watering can and apply the diluted mix at a rate of 1 litre per square metre Apply fortnightly or as required.
Shake or stir well before use. Where higher water rates are required for good foliar coverage, do not exceed maximum product rate per hectare. Sensitive foliage or plants should be test sprayed prior to full scale application. Frequencies are a guideline only and can be adjusted according to farm practices and/or in conjunction with crop monitoring. Ensure suitable spray conditions (e.g. temperature, humidity, wind- speed), prior to foliar application. Compatibility and/ or performance cannot be guaranteed when combining with other products (including various herbicide formulations). Jar test for compatibility and spray on a small area before widespread application
Store in a cool dry area out of direct sunlight. Do not pre-mix or store in diluted form. Seal lid/cap immediately after use
Avoid spraying close to harvest if produce is susceptible to staining. Note: Product in 1000 L tanks may weigh over 1 tonne. Forklift with 2 tonne lifting capacity is recommended
Online orders are only available within Australia. For international orders, please contact us.
Click here for detailed shipping information.
Any recommendations provided by Nutri-Tech Solutions Pty Ltd (NTS)
or its Distributors are advice only. As no control can be exercised over storage, handling, mixing, application or use, or weather, plant or soil conditions before, during or after application (all of which may affect the performance of our program), no responsibility for, or liability for any failure in performance, losses, damages, or injuries (consequential or otherwise), arising from such storage, mixing, application, or use will be accepted under any circumstances whatsoever. NTS recommend you contact an Agronomist prior to product application. The Buyer assumes all responsibility for the use of any NTS products.