Nutri-Phos Super Active™
Bioavailable micronised phosphorus and calcium for liquid application.
Nutri-Phos Super Active™ contains 12.6% phosphorus and 28.9%
calcium in combination with good trace element levels. Micronisation provides rapid-release characteristics making it an excellent option for inclusion at planting. A sustained-release portion helps ensure adequate phosphate supply throughout the season.
Product Benefits
- Australian Certified Organic (ACO) Registered Farm
Input 456AI. - Micronised powder suitable for liquid
application. - An economical, freight-friendly alternative
to liquid formulations. - Ideal for growers seeking a citrate-soluble
phosphate kick-start. - Combines rapid-release characteristics
with a slowly available pattern, to ensure
adequate phosphate supply throughout the
season. - Processed phosphate fertilisers can contain high levels of the heavy metal, cadmium. NTS Soft Rock™ is an unprocessed phosphate – an ideal alternative for minimising this environmental and health problem.
- Colloidal minerals provide health benefits to soil microbes.
Typical Analysis W/V (Dry Basis)
|
Total Phosphorus (P) |
12.6% |
|---|---|
| Calcium (Ca) | 28.9% |
|
Particle Size |
Average 5 microns |
| Appearance | Cream/light tan powder |
Analyses given for naturally sourced products are a typical analysis only, due to the natural variations that can occur.
Application Rates
| Type | Rate |
|---|---|
| Liquid Inject |
2 – 5 kg/ha
|
| Soil Ameliorant or Fertigation |
5 – 100 kg/ha
|
| Foliar Spray |
Broadacre
|
Maintain constant agitation in tank. It is advisable to pre-mix, adding this product slowly while maintaining agitation in spray tank to prevent settling of solids. Will pass through 200 micron filter under ideal conditions, however, a coarse inline filter (500 microns/35 mesh) is recommended to ensure the delivery lines are free from particle contaminants from other sources. Where higher water rates are required for good foliar coverage, do not exceed maximum product rate per hectare. This product may leave a visible residue on leaves and fruit when used as a foliar. Avoid spraying close to harvest if produce is susceptible to staining. Sensitive foliage or plants should be test sprayed prior to full scale application. Frequencies are a guideline only and can be adjusted according to farm practices and/ or in conjunction with crop monitoring. Ensure suitable spray conditions (e.g. temperature, humidity, windspeed), prior to foliar application. Compatibility and/or performance cannot be guaranteed when combined with other products. Jar test for compatibility and spray test on small area before wide-spread use.
Store in a cool, dry place. Refer to label before use.
WARNING Do not swallow. The dust from this product may act as an irritant. Avoid inhalation and contact with the eyes and skin. Avoid windy conditions whilst adding product to the tank. Additional information is listed in the Safety Data Sheet.
Online orders are only available within Australia. For international orders, please contact us.
Click here for detailed shipping information.
Any recommendations provided by Nutri-Tech Solutions Pty Ltd (NTS)
or its Distributors are advice only. As no control can be exercised over storage, handling, mixing, application or use, or weather, plant or soil conditions before, during or after application (all of which may affect the performance of our program), no responsibility for, or liability for any failure in performance, losses, damages, or injuries (consequential or otherwise), arising from such storage, mixing, application, or use will be accepted under any circumstances whatsoever. NTS recommend you contact an Agronomist prior to product application. The Buyer assumes all responsibility for the use of any NTS products.
You may also like
More from Dry Mineral Fertilisers
Recently viewed