The pH scale ranges from 0 – 14 (acidic to alkaline or basic), with pH 7 being neutral. Soil pH affects the availability of nutrients to crops, and for most crops the ideal soil pH is 6.4. Soil pH can be measured quickly and accurately with the Expert pH Meter and soil test kit.
This meter can also be used for monitoring water quality and determining the pH of fertiliser solutions. This can provide valuable information regarding mix compatibility and allow the user to determine and fine tune the tank mix pH for optimum efficacy. The ideal pH for a foliar fertiliser application is 6.0 – 8.0.
Benefits
Calibration Recommendation:
Perform a 2 point calibration at pH 7.0 & pH 4.0 using the buffer solutions included before first use and then weekly (if used less frequently than weekly, calibrate before each use). Follow the calibration instructions included with the meter.
Measurement:
The pH of water and fertilizer mixes, etc. can simply be measured by dipping the sensor in the solution as per the instructions included with the meter.
Sampling:
Wearing gloves to avoid contamination, take samples from 15 – 20 sites within the test area. Sample to a depth of 15 cm. Remove any plant matter from the top of the sample. Combine samples in a clean container and mix thoroughly. Take a small subsample of the mixed soil and fill the testing jar to the 25 mL mark with soil.
Using distilled water, fill the testing container to the 125 mL mark. This is a 1:5 soil to water mixture. Cap the jar and shake thoroughly for 5 seconds. Allow the contents to sit for 30 minutes. Swirl the solution then dip the pH meter probe into the soil/water solution and wait for a stable pH reading.
Using this solution will extend the life of the electrode. After use, clean the pH meter probe with water and add approximately 10 mL of storage solution to the pH meter cap. Cap the meter and store upright (so that the electrode tip remains in the solution).
Note: The electrode cap is not completely watertight, so storing the meter upright is required to prevent leakage.
If the pH meter has been stored without storage solution for a long time, it may need to be conditioned before use. This can be done by soaking the electrode in storage solution as described above for a period of 1 hour before use.
pH 7 Buffer Solution 120 mL
Product Code: METPH7BS-120
pH 4 Buffer Solution 120 mL
Product Code: METPH4BS-120
Read the instructions carefully.
Store in cool, dry place.
Please contact us for more information.
Follow all instructions
Online orders are only available within Australia. For international orders, please contact us.
Click here for detailed shipping information.
Any recommendations provided by Nutri-Tech Solutions Pty Ltd (NTS)
or its Distributors are advice only. As no control can be exercised over storage, handling, mixing, application or use, or weather, plant or soil conditions before, during or after application (all of which may affect the performance of our program), no responsibility for, or liability for any failure in performance, losses, damages, or injuries (consequential or otherwise), arising from such storage, mixing, application, or use will be accepted under any circumstances whatsoever. NTS recommend you contact an Agronomist prior to product application. The Buyer assumes all responsibility for the use of any NTS products.
